Accessories

• Fits all corrugated plastic signs up to 24"hx24"w
• Wire stakes slide directly into fluting of corrugated plastic signs--no hardware required!
• Dimensions: 24"h x 10"w
• Two support bars: one 8" from the top and one 8" from the bottom
• Material: 9 gauge galvanized steel (0.148")
• Perfect for Arrow and House-shaped directional signs!
• For Outdoor Use Only
Signs sold separately

• Fits all corrugated plastic signs (works best with signs 24"hx24"w and smaller)
• Inserts directly into the sign--no hardware required
• Dimensions: 30"h x 10"w
• Support bars 8" from the top and bottom
• Material: 9 gauge wire (0.148")

Sign sold separately

• Works with 18"h x 24"w corrugated plastic and aluminum
• Works with double sided signs
• Rider Dimensions: 6"h x 24" using attached clamp

See below for full product specifications

Sign sold separately
Zip ties sold separately

• Heavy duty angle-iron construction
• Works with 18"h x 24"w signs
• Works with single or double sided signs
• Sign slides easily into the frame--no hardware required

See below for full product specifications

Signs sold separately

• Economical polyethylene tape, for indoor use
• Perfect for all of your sign hanging needs
• Includes (4) 3" pieces

• Works with Exclusive or Open Arm Posts and A-Frames
• Used to attach panel or rider to frame
4 units per order
Sign and frame sold separately

• Works with Bandit, Scotsman, and Anchor Stakes
• Used to attach 4 mm corrugated plastic to stake
• Kit includes:
 • (2) Wing Nuts
 • (2) 1" Washers
 • (2) 1/2" Bolts
10 kits per order
Sign and frame sold separately

• 6 pieces of 2" x 2" adhesive-backed velcro
• Perfect for all of your sign hanging needs
• Compatible with aluminum, corrugated plastic, and solid thermal plastic signs

• Securely attaches to signpost with 3M™ Command™ Outdoor Strips (included)
• Great for use with colonial posts, metal frames, and more!
• Compatible with signs larger than 12 inches wide
• Solar powered with automatic shut off
• Damage free and easy to install
• Weight: 6.9 ounces
Signs and signposts sold separately

• Perfect to display your horizontal banner outdoors
• Tee Posts are 72" in height
• 1.25" Powder Coated Steel
• Sold in pairs
• Includes 4 zip ties

Banner sold separately

• Package of 4
• These 20" fibertex cords stretch to approximately 30"
• Allows for moderate wind play, but keeps banner stretched tight
• Compatible with all grommeted banners

• Package of 4
• These 40" fibertex cords stretch to approximately 60"
• Allows for moderate wind play, but keeps banner stretched tight
• Compatible with all grommeted banners

• Contains 25 ties
• Made from nylon
• Perfect for attaching signs and banners to just about anything
• Compatible with grommeted banners and holed signs

• Contains 8 ties
• Made from nylon
• Perfect for attaching signs and banners to just about anything
• Compatible with grommeted banners and holed signs

·Specifically designed for maximum visibility in the outdoors.
·All pieces snap together for a quick and efficient display.
·Grommeted Banner attaches to the frame with ball bungees. Banner, bungees and ground sleeves sold separately.
·Poles stand 5 ft tall when assembled. 
·Works with the following banner sizes: (H x W): 2x2, 2x4, 2x5, 2x6, 2x8, 2x10, 2x12, 3x2, 3x3, 3x5, 3x6, 3x8, 3x10, 3x12, 4x8, 4x10, 4x12, 5x2, 5x3

• 2" heavy duty snap hooks
• Ideal for attaching banners to cables
• Compatible with grommeted banners
• ORDER QUANTITY REPRESENTS 1 SET OF 4 BANNER HANGING CLIPS (quantity 1 = 4 clips)

Made of ultra-high strength composite film, these ClearTabs are stronger than grommets. ClearTabs also blend in to the banner to let your color image shine through. Use the outer loop for indoor use and the inner hole for outdoor use (tested wind speeds of up to 70mph!). Inner hole must be punched by user when applying ClearTab.

• Works with bolt in frames
• Used to attach rider or panel to frame
• Each Kit includes:
• (40) Wiz Nuts
• (40) 3/8" Bolts
Sign and frame sold separately